We now are very pleased to offer this new LowRange re-geared Trans and LRT2 Tcase combo made especially for the low end torque and control we all need in our scale truck builds! This new combo set works especially well on the small-count ring and pinion axle sets we see in the market today, such as Yota II, Vaterra, and SCX trucks.
Using hand picked GCM components, we have assembled the scale truck builder's dream drivetrain including a right or left side drop transfer case in every package. Start your next custom build with this beautiful and strong scale combo, and add some engine cover flair with our GCM Motor kit components as well available at our GCM Racing ShapeWays store Here at this link !
Included in this combo is the following:
1x full GCM LRT2 Tcase -Left or Right drop, overdrive front shaft output already built in, 5mm output shafts and thru-pin holes.
1x GCM LowRange scale Trans, including all steel gears and shafts, aluminum case, and a 14.3:1 gear ratio as per our spec.
1x GCM motor/Trans mount plate with 4 threaded mount holes and hex hardware.
This package has been hand picked to work flawlessly together, with the GCM motor mount plate, the ALL NEW GCM LowRange trans (custom geared for this combo), and the LRT2 T-Case. We picked all steel shafts and gears for this unit to supply a reliable comp-worthy scale drivetrain setup that looks great!
Mounting the unit is easy. We included hardware and 4 M3 threaded holes in the mount plate to allow easy L bracket mounting to just about any build. We also included 2 M2.5 screws to use in the back of the LRT2 case in place of the lower setscrew plugs for securing a crossmember to the back of the T-Case.
This LRT2 case is the same as our current LRT2 offering that fits the RC4wd R4 trans, but we have changed the shafts and gears to work with this GCM combo, and the internals will not fit the RC4wd R4 transmission. The motor plate supplied in this combo is the same unit we have offered for a long time.