Rock crawling truck kits - TCS Crawlers

FEATURES: Chassis: Rigid 6061-series aluminum TVP (twin vertical plate) 0.098"
            (2.5mm) thick, extra low CG for high degree of control and
            cornering ability, included wheelie bar, twin battery boxes hold a
            variety of battery types
          Drive: Four wheel shaft
          Brushless Motor: HPI Flux Tork 2200Kv with machined cooling fins, 5mm
            shaft, handles up to 25V of power, held in place with two machined
            8mm billet aluminum clamps and 0.12" (3mm) thick 7075 billet
            aluminum motor mount
          Radio: HPI TF-20U 2.4GHz with steering and throttle trim and reverse
            and dual rate adjustment, transmitter does not have charge jack
          Electronic Speed Control: HPI Flex Blur with reverse, programmable,
            integrated cooling fan and up to 6S LiPo battery handling
            capability
          Transmission: All metal gears running on rubber-sealed ball bearings
          Differential: Equipped with machined super heavy duty bevel gears,
            upgradeable with all nitro Savage option parts
          Spur Gear: Machined steel, 44 tooth
          Suspension: Uprights designed for the larger tires and weight of the
            Savage XL
          Wheels: HPI Warlock, chrome finish, width: 2.2" (56mm), 3.3" (83mm)
            diameter
          Tires: GT-2 on/off-road with blocky tread pattern and heavy-duty
            sidewall teeth, 6.3" (160mm) diameter, 3.4" (86mm) wide
          Shocks: Big Bore nylon bodied, oil filled
          Caster: Adjustable front and rear toe-in, caster/toe-in refers to the
            angle of the front suspension when viewed from the side of the car
          Camber: Adjustable, camber refers to the angle of the tops of the
            tires from vertical when viewed from front or behind vehicle
          Body: Trimmed and painted GT-2

INCLUDES: Assembled 1/8 scale HPI Savage Flux HP Monster Truck with Flux Tork
            2200 brushless motor, Flux Blur ESC, HPI 2.4GHz radio system, SF-5
            high torque metal gear steering servo, painted & trimmed body,
            wheelie bar, instruction manual and HPI RC Cars DVD

REQUIRES: AA Batteries: Six for transmitter
          Batteries: Two NiMH (up to 8-cell flat or stick packs) with Deans
            connectors, or 2S or 3S LiPo hard case battery packs, 25C minimum
            (both batteries must be the same type, voltage and capacity)
          Battery Charger: Depending on type of batteries selected
          Building and track equipment

SPECS:      Vehicle-
          Length: 21"   (533mm)
          Width:  16.8" (427mm)
          Height: 10"   (254mm)
          Front and Rear Track: 16" (406mm) outer edges of tires, side to side
          Front and Rear Tread: 13.1" (332.5mm) center of tires, side to side
          Wheelbase: 13.6" (345mm)
            Body-
          Length: 19.2" (487mm)
          Width:  8.5"  (216mm)
          Height: 5"    (127mm)