INCLUDES: Novak M2 Dig 3S Electronic Speed Control with receiver plug, 2x Terra Claw motors, power wires and instruction sheet
REQUIRES: Installing in vehicle and connecting to battery, receiver and motors
SPECS:
Input Voltage: 2-3S LiPo/LiFe cells or 4-9 NiMH cells (1.2V/cell)
On-Resistance (dual motor): 0.0016 ohm at 25° C trans temp
On-Resistance (single motor): 0.0008 ohm at 25° C trans temp
Size: 1.16 x 1.47" (29.5 x 37.3mm)
Weight (w/o wires): 1.30oz (36.9g)
Motor Limit: 27-turn (2S), 33-turn (3S) 540-sized dual brushed motors
BEC: 6.0 volts DC/5.0 amps
Status LEDs: 4 on-board; 2 external
Voltage Cut-Off: 6.25V (2S LiPo), 4.75V (2S LiFe), 9.75V (3S LiPo)
7.125V (3S LiFe) (when LiPoly cut-off circuitry is enabled)
Power Wires: 14G super-flex copper-strand silicone wire
