Speed Controllers and accessories

-Truck Kits

-Chassis Kits

-Package Deals

-Wheel Products

-Scale Parts

more...

The Crawlers Store LLC :: -Electronics :: Speed Controllers and accessories :: Novak Mongoose Crawler Micro Brushless System #3055

Printable version

Manufacturers

3Racing
Airtronics
Axial
Bender Customs
Blue Torch Fab Works
Castle Creations
Crawler Innovations
Darksoul
Deans
Duratrax

Other manufacturers...

Special

Help

Novak Mongoose Crawler Micro Brushless System #3055

Crawling has taken on a new dimension, and Novak is following its lead with a pint-size counterpart to 1/10-scale crawling. Bred from the Goat Crawler Brushless System (#3019) but sized the same as the Mongoose Micro Systems (#3050 - #3052), Novak’s Mongoose Crawler Micro Brushless System – 18.5T (#3055) is the first micro sensor-based system specifically designed for 1/18-scale crawler vehicles. The fully-programmable Mongoose Crawler System includes all of the features found in the Goat System, such as instant throttle response, super low-speed driveability and explosive torque, but also includes the ability to run on two or three-cell Li-Po batteries, which the speed control automatically detects through Novak’s auto detect software. Though the micro-sized system packs a lot of power, it fits perfectly in Losi’s® Mini Rock Crawler™, giving users the edge in crawling competitions.

THE MIGHTY MONGOOSE
The Mongoose Crawler’s powerful 18.5-turn motor scales over other brushed motors because of its massive start up and low-speed torque. The 380-sized motor features a sensor-based commutation design to ensure no hesitation before acceleration, and provides smooth braking and controlled delivery of power. It provides longer run times than any stock crawler brushed motor and is as powerful as any dual crawler-micro brushed motor setup. Additionally, the brushless motor includes a high-strength sintered rotor with a rugged 1/8” shaft for stronger motor braking power and improved performance in higher temperature conditions. And like all Novak motors, it is completely rebuildable, allowing for the ability to upgrade or replace various motor parts.

MONGOOSE CRAWLER MICRO BRUSHLESS SYSTEM FEATURES

Four user-selectable throttle profiles (3 brushless, 1 brushed) that feature Zero Reverse Delay

Fully programmable interface using Novak’s One-Touch™ button to adjust high-power Hill/Drag

Brakes (in brushless crawler profiles), Minimum Drive and Deadband. Drive Frequency is adjustable in Brushed Mode only.

Built-in Motor Rotation Reversing (can be activated in brushless modes only)

Sensor-based technology for excellent low-speed driveability

Water-resistant case

Thermal Overload Protection and Novak’s Radio-Priority Circuitry™

Oversized Front Bearing for extra durability and extended life

Aluminum ribbed end bells for additional cooling

Direct-Solder Wiring Tabs for flexible soldering options

Minimal Maintenance

Designed and assembled by Novak in Irvine, Calif., using globally-sourced components

MONGOOSE CRAWLER MICRO BRUSHLESS SYSTEM SPECIFICATIONS

Forward/Reverse: Forward, Hill/Drag Brake, Reverse

Input Voltage: 2-3 Li-Poly cells or 4-9 Ni-MH/Ni-Cd cells (1.2V/cell)

On-Resistance*: 0.0038 ohms per phase (brushless/brush)

Footprint: 1.15" x 0.95" (29 x 24.3 mm)

Weight: 3.31 oz. (93.7 grams)

Rated & Braking Current*: 40 amps per phase (brushless/brush)

Power Wires: 16-gauge

BEC: 6.0 volt / 2.0 amps

Motor Limit: 18.5-turn (brushless); 22-turn (brushed mode) [380-size or smaller motor]

Battery Plug: none

Motor Plug: 2 mm connectors

Voltage Cut-Off: 6.25 volts (2S), 9.38 (3S) [when Li-Poly Cut-Off Circuitry is enabled]

Turns: 18.5

Design: Sensor-based

Watts: 82

Kv (unloaded): 4,400 RPM/volt

Motor Size: 380 size: 1.02" D x 1.48" L (26 D x 37.7 L mm)

Shaft Diameter: 1/8" (3.2mm) [accepts all existing pinion gears]

Bearing Size: Oversized (1/2" x 3/16") Front; Standard Rear (7mm x 3mm)

Details