Speed Controllers and accessories

FEATURES:   ESC Features-
          Two specific crawling driver profiles that feature zero reverse delay
            and high-powered drag brakes (or "hill or "hold" brakes)
          Built-in LiPo cut-off protection prevents batteries from going below
            the critical safety voltage level
          User replaceable input harness
          Heavy duty 6V/5A BEC
          Radio priority and polar drive circuitry
          High-efficiency heat sink
          Power output for optional 6V fan (available separately, NOVC5648 )
          Water resistant case
          Thermal overload protection
            Terra Claw Crawler Motor Features-
          Designed for vehicles requiring precise movement control
          High number of turns for excellent torque and long-run times
          Brass bushings
          Non-rebuildable
          Direct-Solder Wiring Tabs for flexible soldering options
          120 day limited warranty on both components

INCLUDES: Novak Rooster Crawler Electronic Speed Control with instructions
            Tamiya style JST battery connector, use-replaceable input harness
            and double-sided tape
          Terra Claw Fifty Five Crawler Brushed Motor

REQUIRES: Installing in vehicle and connecting motor and battery

SPECS:      ESC
          Input Voltage: 4-7 NiCd / NiMH cells (1.2V per cell) or 2 LiPo cells
          Size: 1.54" x 1.18" (39 x 30mm)
          Weight: 2.66oz (75.5g) w/wires; 1.57oz (44.5g) w/o wires
          On-Resistance: 0.0014 ohms (forward); 0.0028 ohms (reverse)*
          Rated Current: 400A* (forward)
          Braking Current: 200A*
          BEC: 6.0V/5.0A
          Motor Limit 27-turn Brushed (at 6 cells NiMH )
          Discrete Steps: 256 Forward; 256 Reverse
          Battery Plug: Tamiya type
          Drive Profiles: 2
          Status LEDs: 2
          Voltage Cut-off: 6.25V ( LiPo Profiles)
          *MOSFET rating at 25°C junction temperature

            Fifty Five Crawler Brushed Motor
          Number of Turns: 55
          Design: Non-rebuildable
          Input Voltage: 4-7 cells (1.2V/cell) or 2S LiPo cells
          Motor Size:  1.96 x 1.40" (49.8 x 35.6mm)
          Shaft Diameter:  0.125" (3.2mm) accepts all existing pinion gears
          Weight: 5.80 oz. (164g)
          RPM: 8,000 @ 7V or Kv of 1140 RPM/Volt
          Power Output: 22 Watts @ 4,500 RPM
          Efficiency Peak: 67% @ 6,300 RPM torque 588gm/cm