Nav Menu 1
Nav Menu 2
Site Help / FAQ
Stay on the radar
Sign up for our newsletter and be the first to hear about great deals!
Scale Rock Crawlers
Scale Model Specific Aftermarket Parts
SSD 2 SPEED TRANSMISSION CONVERSION KIT FOR SCX10 II SSD00131
Stock Status:(Out of Stock)
Email me when Back-In-Stock
Hardened steel gears and shafts
Hardened steel gear shift mechanism
CNC machined aluminum shift servo mounts
Direct fit into Axial SCX10 II kit transmission and chassis
This is a conversion kit, not a complete transmission.
Requires shift servo and extra channel on radio.
1st gear ratio: 2:1 (same as the stock kit transmission)
2nd gear ratio: 1.08:1
Hardened steel bottom shaft
Hardened steel gears
Aluminum shift fork with steel shift rod
Aluminum shift servo mounts
Gear shift linkage parts
3 * 5 x 10 x 4mm
5 x 11 x 4mm
2 * 1mm spacer
4 * M3 x 8mm button head
2 * M3 x 10mm button head
2 * M3 x 12mm button head
10mm M3 thread
2mm E clip
HD steel transfer case gears are also available (SSD00135)
HEAT TREATED HARDENED STEEL MACHINED GEARS
Knowing the harsh environments this system is intended for; the goal was to produce a gear set strong enough to take on anything thrown at it. This lead to developing a steel gear set that has been hardened, heat-treated and machined to tight tolerances for optimum performance. The 2-speed gear slider features the same treatment as the gears along with having four-tooth engagement design for accurate and rapid gears shifts on the fly.
FULL SET OF CARTRIDGE BEARINGS
Supplied in the 2-speed kit is a full set of cartridge bearings (6), which is great because while you’ve got the transmission apart it makes for a great rebuild opportunity.
Actuating the gear shifting can be done with either micro or standard sized servos thanks to the multiple mounts offered in the kit. It’s suggested to use a servo that features at least 80oz/in of torque to properly complete the shift. The kit features a servo saver design for increased servo longevity and two different servo horns (one long, one short) depending on servo used along with three inserts (23T, 24T, 25T) accommodating for various servo spline counts.
Within the package all necessary hardware needed to complete the installation of the 2-Speed conversion into your YETI ™ transmission is supplied, including the servo mounting screws.
• Heat treated, hardened, and machine cut gears (18T, 28T, 26T, 36T, slider)
• Full set of transmission cartridge bearings (AXA1221 and AXA1218)
• All necessary hardware (AXA146, AXA0145, AXA116, AXA0147, AXA0109, AX31073)
• Servo saver system, w/ two servo horns, three spline adapters (AX31009)
• Servo mounting brackets (micro and standard)
• Lo Gear ratio: 2:1
• Hi Gear ratio: 1.08:1
• Hi Gear Option ratio: 0.93:1
SSD Pro Aluminum Knuckles for Axial SCX10 II (Black) SSD00144
SSD Brass Knuckle Weights for Axial SCX10 II SSD00140
SSD HD STAINLESS STEEL LOWER LINK SET FOR AXIAL SCX10 II SSD00124
SSD Pro Aluminum C Hubs for SCX10 II (Black) SSD00145
Team Fast Eddy Axial SCX-10 ll Sealed Bearing Kit TFE-SCX10-V2
SSD PRO ALUMINUM REAR LOCKOUTS FOR SCX10 II (BLACK) SSD00146
SSD ROCK SHIELD WIDE REAR BUMPER FOR SCX10 II SSD00174
SSD Pro Aluminum C Hubs for SCX10 II (Silver) SSD00149
Share your knowledge of this product.
Be the first to write a review »