Named "Stage 3" due to
the 3 link with panhard conversion, this kit will mount your steering
servo to the chassis while greatly stiffening up the front frame. The
CMS plate also has provisions for mounting a battery or the KMS K3 winch
and can be flipped to run the steering servo on the drivers or
passenger side OR both (dual servos).
The links in the kit for SCX10 Honcho and Wrangler Unlimited Rubicon are machined and bent from 6Al-4V (grade 5) Titanium.
Our SCX10 Stage 3 kit comes with (10) Ti links, CMS plate,
upper(frame) and lower(axle) panhard mounts and a 3 link truss mount.
All normal hardware is included as well as (20) oversized Revo rod ends
with steel balls. All aluminum parts are anodized black.
Knuckles - You can use just about any knuckle with this kit
but if you are picky about suspension geometry we recommend one of the
the various "high steer" knuckles to match the angle of steering link
with the angle of the panhard link. (Stock mid-steer knuckles still
work great as shown in the pics.)
Freespool Winch - Because of clearance issues with the
steering servo, the KMS K3 Freespool winch cannot be mounted in a
traditional fashion however you may mount it vertically (very trick, see