If you want to get the rear shocks out of the way for your interior kit, then this is the trick... and KEEP all your rear link suspension the same!
The axle hoops fit over the tube from the bearing ends, and bolt into the space beside the rear links.
The included spacers fit in the place where the stock shocks were positioned, and the new rear shocks fit on the back of the new axle brackets.
The top of the new shocks fit in the 3 positions for mounting on the frame cross brace and get all the shock space under the frame.
After mounting the items you have the option to keep the upright shock towers and body mount, or remove them for a flat rear floor and get your interior flat in the back of the truck!
This setup works great WITH the rear shock tower ON or with the rear shock tower OFF the frame. The kit still fits the same.
1 rear shock bridge
2 axle brackets
All the spacers and Hex hardware
This kit requires a 70 or 75mm rear shock to fit well. We recommend a large bore spring for a solid and tunable ride in the rear of your ascender. The stock ascender shocks can not be used on this relocation kit.
**When available we have a 75mm Rear Shock option to add to your order. These REQUIRE your own shock oil to be added, as they are shipped with NO lubrication in them. We recommend a 60 to 80 weight silicone shock oil in this shock for a nice smooth shock and great rear suspension control.**