The FX series blasts off into a new era of brushed speed controls from Tekin! With a new, smaller footprint and using groundbreaking, flash-programmable microcontrollers with the lowest on-resistance MOSFETS ever used in a speed controller, the FX completely eliminates any power bottleneck between your battery and motor, increasing efficiency and breathing new life into your brushed motors! The FX is also capable of extensive tuning and updates via PC with Tekin's HotWire PC Interface (sold separately).

FEATURES:
Easily Access All Programming, Anywhere, Anytime
On-Board Temperature Indicator
PC Interface for Custom Programming *Tekin HotWire Required
HDAC: High Density Copper Fet Boards
Solder Posts for Easy Wire Replacement
Self Test Diagnostics and Factory Reset
Pit Tune Mode
Digital Glitch Filtering
QuickTune One-Touch Programming
One-Touch Radio Calibration

PROGRAM FEATURES:
Drag Brake (11 steps)
Neutral Width (11 Steps)
Current Limiter (none, 10 steps)
Push Control- Anti Drag (11 steps)
FX, FXPro: Throttle Profiles (6 choices)
FX, FXPro: Brake Profiles (6 choices)
FX-R,FX-R Pro: Reverse Type (3 choices)
FX-R,FX-R Pro: Reverse Strength (11 steps)
Voltage Cutoffs (none, 2S, 3S, Custom)
Tuning via Tekin HotWire PC Interface (sold separately)

FX-R Specifications
Controls: Forward / Brake / Reverse
ON Resistance: 0.0012 Ohm
Input Voltage: 4-9 Cells / 2S Lipo
BEC: 6.0V / 3.0A
Motor Limit: 14 Turn
Rev Type: 3 Choices
Rev Strength: 11 Steps
Dimensions: 1.1 x 0.80 x 0.40 " (28 x 20 x 10mm)